KEY FEATURES? FIRST
PROGRAMMER TO READ AND DISPLAY EGTs, probe included? Provides in-cab display
to monitor vital engine functions ? Additional 100 HP and 200 ft. lbs of
torque ? Three power levels? Ships with a custom designed pod? Internet
updateable (cable included)? Displays and clear diagnostic trouble codes ?
Adjustable LED backlight color ? Does 0-60 and Quarter mile performance tests
with the drag strip Christmas tree lighting and reaction times ? Displays
Alerts and Records such as RPM, MPH and EGT ? Datalogs vital engine
information ? Simple installation ADVANCED TUNING ? Able to adjust shift
points/pressure ? Adjustable speed/rev limiter PERFORMANCE TESTING? 0-60 and
Quarter mile performance tests with the drag strip Christmas tree lighting and
reaction times DATA STREAM ? Records 5 parameters for up to 60 seconds?
Viewable graph using available software PIDSThe Evolution allows the user to
view up to 4 PIDs at one time. There are 11 different PIDs to choose from.
Below is a list and description of each:? RPM (revolutions per minute) ?
Engine speed.? MPH (miles per hour) ? Note: Dash display may be +/-3 MPH off
from the digital display due to mechanical differences in the spring, etc.
used to control the gauge.? BST (Boost Pressure) – PSI? EGT (Exhaust Gas
Temp) ? Degrees F.? EOT (Engine oil temperature) ? Degrees F.? TFT
(Transmission fluid temperature) ? Degrees F. (Automatic Trans ONLY. If you
have a manual trans, the value displayed will be incorrect)? IAT (Intake air
temperature) ? Degrees F.? BARO (Barometric pressure) ? PSI? BAT (Battery
voltage)? DTC (Diagnostic trouble code count)The following power gains are
representative of an actual test vehicle. These gains were measured on a
SuperFlow Dyno at an altitude of 4400 ft above sea level, and represent power
delivered to the rear wheels of the test truck. The only modification made to
the test truck was the addition of the Edge Evolution module. Power gains may
vary based on vehicle and geographical location.Level 1: 60 Horsepower –
100 Foot Pounds of Torque Level 2: 80 Horsepower – 140 Foot Pounds of
Torque Level 3: 100 Horsepower – 200 Foot Pounds of Torque